back

SEDEMAC's GC500 is the cost effective control solution for low-kVA genset engines. It is easily configurable firmware monitors engine & genset safety parameters and takes suitable control actions.

  • Fully graphics, backlit LCD for easy information readout
  • Stores recent 30 events with engine run hour stamps
  • CE Certified
  • Genset controller with 5 digital inputs, 3 analog inputs and 6 digital outputs
  • Monitors and controls gensets performance effectively
  • Senses genset output voltage and frequency precisely
  • Remote start/ stop feature
  • Deep Sleep Mode feature to prolong the battery life
  • Preheat output for assisting engine start
  • PC connectivity via USB port for customised configuration
  • Backlit and full graphics display with power saving feature
  • Last 30 event logs
  • Version available in display with language options
  • Flexible firmware allowing configuration through PC utility, keypad
# Feature SEDEMAC GC500 Deep Sea DSE 3210 ComAp InteliNano MRS DEIF CGC 200
0 Overall size 139 x 114 mm2 98 x 79 mm2 118 x 108 mm2 95 x 83 mm2
1 Manual & auto-start functions, engine safety parameter monitoring, charging alternator I/O interface, license-free PC software connectivity via USB port, warning & shutdown alarms, low power standby, event logs Y Y Y Y
(limitation: charging alternator I/O not supported)
2 Industry standard IEC, CE certification for environmental protection and reliability, IP65 front with gasket (Optional) Y Y Y Y
3 Configurable digital outputs (for fuel, crank, and more) 6 4 4 5
4 Configurable analog inputs (for lube oil, temp, fuel level) 3 Absent 3
( or zero, if all six digital inputs are used )
Absent
5 Configurable digital inputs (for lube oil, temp, fuel level and more) 6 6 6
( or 3 only, if all 3 analog inputs are used )
5
6 Monitoring of 1-ph and 3-ph alternators Y Y
(limitation: 3-ph sensing not supported)
Y Y
(limitation: 3-ph sensing not supported)
7 Fully graphics LCD display Y Absent Y Absent

Environmental Specifications

  • Operating / Storage Temperature: -20°C to 65°C / -30°C to 70°C as per IEC 60068-2-1, 2
  • Vibration: 2G in X,Y,Z axis for 8-500 Hz as per IEC 60068-2-6
  • Humidity: 0% to 95% RH as per IEC 60068-2-78
  • EMI / EMC: Compliance as per IEC 61000-6-2, 4
  • Power Supply: 8V - 32V DC continuous
  • Ingress Protection: IP65 for front face with optional gasket as per IEC 60529
  • Shock: 15 g for 11 mS, compliance as per IEC 60068-2-27

Technical Specifications

  • Maximun Standby Current: ~0.08A @ 12V or 24V DC
  • Crank-Start Dropout Survival Period: 50 mS for a drop from 12V DC
  • Charging Alternator Interface:
    0.25A@ 12V DC; 0.125@24V DC
    Diagnostic voltage measurement
  • Digital Output: 6 x 0.75A high-side drivers configurable for pre-heat, hooter
  • Digital Input: 5 switch-to-ground inputs configurable for lube oil, temp, fuel level etc.
  • Analog Input: 3 resistive input (10Ω - 1000Ω); full configurable for various sources
  • Genset Voltage Measurement: 20V-350V AC RMS @ 5-75 Hz for Ph to N
  • Dimensions:
    External dimensions: 139 mm x 114 mm x 37.5 mm
    Panel Cut off size: 118 mm x 93 mm