back

SEDEMAC’s GC1100 is a feature rich control solution for a wide range of genset engines which monitors engine & genset safety parameters, including 3-ph load and power factor, and takes suitable control actions. The full HD graphics LCD controller offers automation features such as AMF (auto-mains failure), auto-exerciser etc. The CE certified product is a robust performer adept at working even in harsh operating conditions in the field.

  • Supports RS485-MODBUS protocol for remote data communication
  • Stores 100 recent events with real-time clock stamps
  • Incorporates useful counters such as mains & genset energy meters, engine run meter and more
  • Genset controller with 5 digital inputs, 3 analog inputs (Can also be used as digital inputs if configured)
    and 6 digital outputs Auto, Manual and Remote start / stop modes for 1-ph & 3-ph gensets
  • RPM sensing using frequency and MPU
  • Real time clock based event logs
  • PC connectivity via USB port, RS485, CAN
  • Configurable fuel theft alarm
  • Backlit and full graphics display with power saving feature
  • Flexible firmware allowing configuration through PC utility, keypad
  • Version available in display with language options
# Feature
SEDEMAC
GC11 00
Deep Sea
DSE 4510 / DSE 4520
ComAp
InteliNano Plus
Deep Sea
DSE 6110 / DSE 6120
0 Overall size 139 x 114 mm2 140 x 113 mm2 118 x 108 mm2 216 x 158 mm2
1 AMF, manual & auto - start functions
2 Standard features: Engine & genset protection, charging alternator I / O interface, license - free PC software connectivity via USB port, warning & shutdown alarms, low power standby, real time clock based event logs & scheduler, engine speed sensing ( through magnetic pickup )
except engine speed sensing ( through magnetic pickup )

except engine speed sensing ( through magnetic pickup ), and real time clock features
3 Industry standard IEC, CE certification for environmental protection and reliability, IP65 front with gasket ( Optional )
4 Configurable digital outputs ( for fuel, crank, and lot more ) 6 4 Configurable & 2 Fixed ( DSE4520 ),2 Configurable & 2 Fixed ( DSE4510 ) 6 4 Configurable & 2 Fixed ( DSE6110 / 6120 )
5 Configurable analog inputs ( for lube oil, temp, fuel level ) 3 3 3
Or, zero, if all 6 digital inputs are used
3
6 Configurable digital inputs ( for lube oil, temp, fuel level and lot more ) 5 4 6
Or, 3 only, if all 3 analog inputs are used
6
7 Measurement of 1 - ph and 3 - ph alternator & mains currents, real / apparent / reactive power, power factor, energy counter
8 Remote communication via RS485 - MODBUS x x x
9 Event Logs 100 15 10 10

Environmental Specifications

  • Operating/Storage Temperature: -20°C to 65°C as per IEC 60068-2-1, 2
  • Vibration: 2G in X, Y, Z for 8-500 Hz as per IEC 60068-2-6
  • Humidity: 0% to 95% RH as per IEC 60068-2-78
  • EMI/EMC: Compliance as per IEC 61000-6-2, 4
  • Power Supply: 8V - 32V DC continuous
  • Ingress Protection: IP65 for front face with optional gasket as per IEC 60529
  • Shock: 15 g for 11 mS, compliance as per IEC 60068-2-27

Technical Specifications

  • Power Consumption: ~0.08A @ 12V or 24V DC (standby mode)
  • Crank-start Dropout Survival Period: 50 mS for a drop from 12V DC
  • Charging Alternator Interface:
    0.25A @ 12V DC; 0.125A @ 24V DC
    Diagnostic voltage measurement
  • Digital Output: 6 x 0.75A high-side drivers configurable for pre-heat, hooter, etc
  • Digital Input: 5 switch-to-ground inputs configurable for lube oil, temp, fuel level, etc
  • Analog Input:
    3 resistive input (0-1 kΩ); fully configurable for various sources
  • E-governor Module Interface:
    Output for rotary actuator
    (0V - 5V) input for target speed bias; 2.5V for zero bias
  • Mains/Genset Voltage Measurement: 20V – 300V AC RMS @ 3–75 Hz for Ph to N
  • Load Current Measurement: 0A - 5A AC RMS for current transformer (CT) secondary
  • Magnetic Pickup Measurement: 0.2V – 45V @ 100 Hz – 10K Hz
  • Dimensions:
    External dimensions: 139 mm x 114 mm x 37.5 mm
    Mounting Panel Cut: 118 mm x 93 mm